The use of worm gear hose clamp
Release time：
2024-10-17
Worm gear hose clamp is a commonly used fastener, which is widely used in a variety of occasions that need to be fixed and connected. The following is the use of worm gear hose clamps:
1. Preparation
Choose the right hose clamp: According to the use of the environment and needs, choose the right worm gear hose clamp. For example, in high temperature environments, hose clamps of high temperature resistant materials should be selected; In the parts under greater pressure, you need to choose a higher strength hose clamp.
Check hose clamps: Before use, check that hose clamps are intact to ensure that there are no cracks, deformation, or other defects.
Second, installation steps
Open the lock: Open the lock of the worm gear hose clamp for easy installation.
Insert parts: Attach the hose clamp to the part to be fastened, taking care to ensure that the steel tape of the hose clamp is evenly wrapped around the part, and determine the position to be fixed.
Tighten the hose clamp: Use a screwdriver or wrench to rotate the worm and gradually tighten the hose clamp. In the process of tightening, pay attention to even strength to avoid too tight on one side and too loose on the other side.
Lock the hose clamp: When the hose clamp is properly tightened, stop rotating the worm and ensure that the hose clamp is firmly attached to the component.
Third, use precautions
Avoid over-tightening: Do not over-tighten the worm gear throat collar to avoid damaging the parts or causing the throat collar to fail.
Regular inspection: In the process of use, it is necessary to regularly check the tightening of the throat hoop. Due to vibration and turbulence and other factors, the hose band may be loose, and it needs to be tightened in time.
Avoid twisting or damaging the steel belt: During installation and use, avoid twisting or damaging the steel belt of the hose band, so as not to affect its fastening effect and service life.
Timely replacement: If the throat band is found to have signs of damage or aging, the new throat band should be replaced in time to ensure the firmness and safety of the connection.
Iv. Application scenarios
Worm gear throat collar is suitable for a variety of occasions that need to be fixed and connected, such as machinery, construction, vehicles and other fields. Especially in the automotive industry, worm gear throat hoses are often used to fix tubing, water pipes and other hoses to ensure their stability and safety during driving.
In short, the use of worm gear throat hoop is not complicated, but it is necessary to pay attention to the selection of the appropriate throat hoop, correct installation and use, and regular inspection and maintenance to ensure the firmness and safety of its connection.
Related News
Contact us
© 2020 Tianjin City Kainuo Industrial Co., Ltd. All rights reserved Powered by:300.cn SEO TAG